The MHA is a galvanised mini joist hanger suitable for use with regularised timber, rough sawn timber, I-Joists and LVL.
Ideally suited for small timber sections and timber members; such as trimmers and ceiling joists.
Material
Pre-galvanised mild steel
INSTALLATION NOTES
For solid header fill all nail holes. For I-Joist headers fill the bottom two nail holes on each side.
• Hanger depth should be at least 60% of carried member depth to prevent rotation. If less than 60%, then additional lateral restraint to the top of the carried member is required.
Solid Headers
Install 5 header nails per side [A] and install 3 joist nails per side [B]. Fasteners as stated in the relevant performance tables.
I-Joist Headers
For I-joist headers, 2 hangers are required; one top and one bottom
Fill the bottom 2 nail holes on each side; 2 header nails per side [C] and 2 joist nails per side [D]
Simpson Strong Tie Mini Hangers MHA 100Nr
Returns accepted within 14 days and only with original packaging.
